Roland Re Initialization Procedures

If you have troubles with Roland musical instruments build before 1998, try this reset bios procedures. (Caution this procedure will reset your device at factory default)

Se avete problemi con sintetizzatore o altro strumento musicale elettronico Roland, troverete in questa pagine le procedure per resettare il bios di alcuni modelli prodotti fino al 1997.

Model / Modello Procedures / Procedure
A-30
Power on while holding WRITE. (Hold for 15 seconds.)
A-33
Power on while holding WRITE. (Hold for 15 seconds.)
A-50
While holding the first, third, and fourth buttons under the display, press CHANNEL. Then press any cursor button.
A-80
While holding the first, third, and fourth buttons under the display, press CHANNEL. Then press any cursor button.
A-90
A-90 only: Power on while holding down EDIT, then press ENTER. With Voice Expansion Board: Power on while holding down MANUAL, then press ENTER.
A-220
Power on while holding B and MEMORY.
A-880
Power on while holding SIGNAL and MEMORY.
ADA-8024
No ROM reset.
ALPHA JUNO-1
(Same as JUNO-1.) No ROM reset.
ALPHA JUNO-2
(Same as JUNO-2.) No ROM reset.
AP-700
Power on, then press EXIT repeatedly to get ANALYZER/FILTER screen. Cursor to MENU, press ENTER. Cursor to SYSTEM, press ENTER. Cursor to INITIALIZE, press ENTER. Use VALUE to select ALL. Select EXEC, then press ENTER twice.
AR-Series
No ROM reset.
AT-Series
(Make sure disk drive is empty.) Power on while holding ONE TOUCH PROGRAM.
AX-1
Power on while holding WRITE. (Hold for 30 seconds.)
AXIS-1
While holding FUNCTION, press the F#0, C#2, and D#2 keys.
CA-30
The CA-30 resets itself every time you turn it off and then on.
CR-80
Power on while holding DEL and REPEAT, then press ENTER.
All Other CR
No ROM reset.
CSQ-Series
No ROM reset.
D-5
No ROM reset.
D-10
No ROM reset.
D-20
No ROM reset.
D-50
No ROM reset.
D-70
No ROM reset.
D-110
No ROM reset.
D-550
No ROM reset.
DDR-30
Power on while holding the #1 button.
DEP-3
Power on while holding MEMORY NO UP (^) and DOWN (v).
DEP-5
Power on while holding MEMORY NO UP (^) and DOWN (v).
DJ-70
No ROM reset.
DJ-70mkII
No ROM reset.
DM-Series
No ROM reset.
DR-5
Power on while holding FRET LEFT (<) and RIGHT (>), then press ENTER twice.
DR-550
Power on while holding -1 and +1 , then press START.
DR-550mkII
Power on while holding -1 and +1 , then press START.
DR-660
Press UTILITY, then use LEFT (<) and RIGHT (>) to select [8] INIT. Press ENTER twice.
DS-330
Power on while holding REVERB and SPLIT, then press YES.
E-5
No ROM reset.
E-10
Power on while holding WRITE.
E-12
No ROM reset.
E-14US
The unit resets each time you turn it on.
E-15
The unit resets each time you turn it on.
E-16
The unit resets each time you turn it on.
E-20
Power on while holding WRITE.
E-28US
The unit resets each time you turn it on.
E-30
Power on while holding WRITE.
E-35
Power on while holding REC/PUNCH IN.
E-36
Power on while holding RECORDER.
E-38
The unit resets each time you turn it on.
E-56
Power on while holding WRITE.
E-66
Power on while holding REC in the DISK RECORDER section.
E-68
US Power on while holding WRITE.
E-70
Power on while holding WRITE.
E-86
Power on while holding WRITE.
E-96
Power on while holding WRITE.
E-500
Press UTILITY. Use the buttons under <<PAGE>> to select FACTORY PRESET. Press EXECUTE, then press OK. When screen shows RESET COMPLETE, power off, then on.
EM-101
No ROM reset.
EM-303
The unit resets each time you turn it on.
EM-305
The unit resets each time you turn it on.
ep-3
The unit resets each time you turn it on.
ep-5
While holding REC and PLAY, press STRINGS. Power off and then back on.
ep-7
While holding REC and PLAY, press STRINGS. Power off and then back on.
ep-7mkII
While holding REC and PLAY, press STRINGS. Power off and then back on.
ep-9
While holding REC and PLAY, press CHOIR. Power off and then back on.
ep-85/95
ep-707
The unit resets each time you turn it on.
All Other EP
No ROM reset.
FC-100
No ROM reset.
FC-100mkII
Power on while holding pedals #1, #2, and #8.
FC-200
Power on while holding the #10 pedal, then press the CTL pedal.
FG-10
Power on while holding CLEAR and EXIT.
FG-1000
Power on while holding CLEAR and EXIT.
FP-1
The unit resets each time you turn it on.
FP-8
Press FUNC and release. While holding PIANO, press FUNC again.
G-800
Power on while holding WRITE.
GC-8
No ROM reset.
GI-10
Power on while holding PARAMETER + and -, then press VALUE +.
GM-70
Poly Mode: Power on while holding PLAY, GENERAL EDIT, and IND EDIT. Mono Mode: Power on while holding TUNE, CONTROL ASSIGN, and DATA TRANSFER.
 
 
GP-8
No ROM reset.
GP-16
Power on while holding the #6, #7, and #8 buttons. Use the FUNCTION LEFT (<) and RIGHT (>) buttons to select "2.All Factory Preset," then press WRITE three times.
GP-100
Power on while pressing in the PARAMETER knob, then press WRITE.
GR-09
Power on while holding Pedal #2, then press the VALUE + button. Now press EDIT/PLAY.
GR-1
Power on while holding WRITE/COPY, then press YES.
GR-30
Power on while holding Pedal #2, then press the PATCH+ button to select INI. Press EDIT/PLAY. Then press PATCH+ and PATCH- simultaneously.
All Other GR
No ROM reset.
GS-6
No ROM reset.
GT-5
Power on while holding MOD and FEEDBACKER/SLOW GEAR. Press WRITE.
GX-700
Press TUNER/UTILITY. Use PARAMETER LEFT (<) and RIGHT (>) buttons to select FACT INIT. Cursor to left and dial SYSTEM, then right and dial P#100. Press WRITE, then TUNER/UTILITY.
HP-100
(Same as PIANO PLUS-100.) No ROM reset.
HP-130
HP-300
(Same as PIANO PLUS-300.) No ROM reset.
HP-400
(Same as PIANO PLUS-400.) No ROM reset.
All Other HP
(Some also the same as PIANO PLUS-Series.) The unit resets each time you turn it on.
HS-Series
No ROM reset.
JD-800
Press DATA TRANSFER. Use PAGE UP (^) and DOWN (v) to select FACTORY PRESET. Press YES.
JD-990
While holding EXIT, press UTILITY. Press F6 (EXECUTE), then F5 (YES).
JP-6
(Same as JUPITER-6.) No ROM reset.
JP-8
(Same as JUPITER-8.) No ROM reset.
JP-8000
While holding SHIFT, press INIT/UTIL. Press INIT/UTIL repeatedly to select INITIALIZE WRITE. Use the DOWN/UP buttons to select FACTORY PRESET, then press WRITE.
JS-30
Power on while holding RECORD located in the SEQUENCER section.
JUNO-1
(Same as ALPHA JUNO-1.) No ROM reset.
JUNO-2
(Same as ALPHA JUNO-2.) No ROM reset.
JUNO-6
No ROM reset.
JUNO-60
No ROM reset.
JUNO-106
No ROM reset.
JUPITER-6
(Same as JP-6.) No ROM reset.
JUPITER-8
(Same as JP-8.) No ROM reset.
JV-30
Press CHORUS and REVERB (above INITIALIZE) simultaneously. Press VALUE UP (^) .
JV-35
Press CONTROL and MASTER simultaneously. Use PARAMETER UP (^) and DOWN (v) to select ALL. Press VALUE UP (^).
JV-50
Press CONTROL and MASTER simultaneously. Use PARAMETER UP (^) and DOWN (v) to select ALL. Press VALUE UP (^).
JV-80
Power on while holding NUMBER 8 (also labeled PERFORM 16 and CAPS). Press ENTER and then press WRITE.
JV-90
Power on while holding NUMBER 8 (also labeled PERFORM 16 and CAPS). Press ENTER and then press WRITE.
JV-880
Press UTILITY, then use the DATA dial to select FACTORY PRESET. Press ENTER twice.
JV-1000
Power on while holding NUMBER 8 (also labeled PERFORM 16 and CAPS). Press ENTER, then press WRITE.
JV-1080
Press UTILITY. Cursor down once, then cursor right three times to select FACTORY PRESET. Press ENTER twice, then press UTILITY.
JV-2080
Press UTILITY. Press F6 twice to select MENU 3. Press F1. Then press F6. If necessary, use the VALUE DIAL to turn Memory Protect OFF and press F6 twice.
JW-50
Press TUNE/FUNCTION. Press F5 (FACTORY), then F4 (JW RESET), then F3 (GS RESET), then F4 (YES).
JX-1
Power on while holding WRITE and FLUTE.
JX-3P
No ROM reset.
JX-8P
No ROM reset.
JX-10
(Same as SUPER JX keyboard.) No ROM reset.
KR-33
The unit resets each time you turn it on.
KR-55
Hold MIDI/FUNC and press CARD. Hold both VARIATION buttons for 5 seconds.
KR-100
The unit resets each time you turn it on.
KR-350
While holding LOAD and SAVE, press WRITE.
KR-370
The unit resets each time you turn it on.
KR-500
While holding FROM and TO, press WRITE.
KR-570
While holding PART VOLUME ACCOMP, press TRACK 2 and 4 buttons (Composer section) simultaneously. Press PART VOLUME ACCOMP repeatedly to get FACTORY SETUP LOAD in the window. After loading is complete, power off and then back on.
KR-650
While holding LOAD and SAVE, press WRITE.
KR-770
While holding PART VOLUME ACCOMP, press TRACK 2 and 4 buttons (Composer section) simultaneously. Press PART VOLUME ACCOMP repeatedly to get FACTORY SETUP LOAD in the window. After loading is complete, power off and then back on.
KR-1070
KR-3000
While holding FROM and TO, press WRITE.
KR-3500
While holding LOAD and SAVE, press WRITE.
KR-4500
While holding LOAD and SAVE, press WRITE.
KR-4700
While holding EDIT, press LOAD and SAVE.
KR-5000
While holding EDIT, press LOAD and SAVE.
KR-5500
While holding LOAD and SAVE, press WRITE.
LVC-1N
Power on while holding ENTER.
M-660
(Same as RHODES 660.) While holding EDIT, press WRITE. Use PARAMETER UP (^) and DOWN (v) to select ALL, then press WRITE. When completed, press EDIT to return to Play Mode.
M-760
(Same as RHODES 760.) While holding EDIT, press WRITE. Use PARAMETER UP (^) and DOWN (v) to select ALL, then press WRITE. When completed, press EDIT to return to Play Mode.
M-BD1
Power on while holding F3.
M-DC1
Power on while holding F3.
M-GS64
Power on while holding F3.
M-OC1
Power on while holding F3.
M-SE1
Power on while holding F3.
M-VS1
Power on while holding F3.
MC-303
Power on while holding down SHIFT, then press ENTER.
All Other MC
No ROM reset.
ME-5
Power on while holding pedals #1 and #2, then press WRITE immediately.
ME-6
Power on while holding PARAMETER DOWN (v) and LEFT (<), then press WRITE.
ME-6B
Power on while holding PARAMETER DOWN (v) and LEFT (<), then press WRITE.
ME-8
Power on while holding PARAMETER LEFT (<) and DOWN (v), then press WRITE/COPY.
ME-8B
Power on while holding PARAMETER LEFT (<) and DOWN (v), then press WRITE/COPY.
ME-10
Power on while holding the BANK DOWN (v) pedal, then press WRITE.
ME-X
Power on while holding PARAMETER DOWN (v) and LEFT (<), then press WRITE.
MK-60
(Same as RHODES MK-60.) No ROM reset.
MK-80
(Same as RHODES MK-80.) While holding WRITE, press EDIT. While holding the LEFT (<) and RIGHT (>) cursor buttons, press UP (^).
MKB-Series
No ROM reset.
MKS-50
Poly Mode: Power on while holding NUMBER 4 and 8. Mono Mode: Power on while holding NUMBER 3 and 7.
All Other MKS
No ROM reset.
MP-Series
No ROM reset.
MS-1
No ROM reset.
MSQ-100
No ROM reset.
MSQ-700
No ROM reset.
MT-32
While holding MASTER VOLUME, press RHYTHM PART. Press PART 1.
MT-80s
The unit resets each time you turn it on.
MT-100
While holding STOP, press DELETE. After the display flashes ALL CLEAR, press EXECUTE. MT-120
MT-120s
Power on while holding REPEAT, SONG (blue button), and PLAY. Press FWD repeatedly, until the window reads T-13. Press PLAY, then press REC. Power off, then on.
MT-200
Power on while holding REPEAT, SONG (blue button), and PLAY. Use the DIAL to select T-15 in the window. Press PLAY, then press REC. Power off, then on.
MV-30
(Same as STUDIO M.) No ROM reset.
OCTAPAD
(Same as PAD-8.) Power on while holding MIDI CH and NOTE NUMBER. Power off and then back on.
OCTAPAD II
(Same as PAD-80.) Power on while holding both VALUE (solid < and >) buttons.
P-55
Power on while holding both INSTRUMENT buttons, then press PARAM 1.
P-330
No ROM reset.
PAD-8
(Same as OCTAPAD.) Power on while holding MIDI CH and NOTE NUMBER. Power off, then back on.
PAD-80
(Same as OCTAPAD II.) Power on while holding both VALUE (solid < and >) buttons.
PC-150
Power on while holding COMMAND on the left edge of the keyboard.
PC-200
Power on while holding the two buttons under the word STANDARD.
PC-200mkII
Power on while holding the two buttons under the word STANDARD.
All PIANO PLUS
(Same as some of the HP-Series.) No ROM reset.
PK-5
Power on while holding OCT/PARAM .
PLANET-P
(Same as MKS-10.) No ROM reset.
PLANET-S
(Same as MKS-30.) No ROM reset.
PM-16
Power on while holding NUMBER buttons 1 and 2. (This reloads the first BANK of settings.)
PMA-5
Press UTILITY, then press the RIGHT (>) cursor button repeatedly to select INITIALIZE. Press ENTER, then [EXEC].
PR-100
The unit resets each time you turn it on.
PRO-E
Power on while holding WRITE.
R-5
Power on while holding CURSOR PAGE and PARAM SELECT, then press ENTER twice.
R-8
Power on while holding CURSOR PAGE and PARAM SELECT, then press ENTER twice.
R-8mkII
Power on while holding CURSOR PAGE and PARAM SELECT, then press ENTER twice.
R-8M
Power on while holding ENTER and the RIGHT (>) CURSOR button, then press ENTER twice.
R-70
Power on while holding MIDI and ASSIGN, then press YES twice.
R-880
No ROM reset.
RA-30
The unit resets each time you turn it on.
RA-50
Power on while holding WRITE.
RA-90
Power on while holding WRITE.
RA-95
Power on while holding REC.
RA-800
(WARNING: This will erase the original factory Performance settings. However, you can save them to disk before doing this procedure.) Power on while holding WRITE.
RD-500
Power on while holding NUMBER 1 and 8. Press DEC/YES.
RD-600
Press EDIT. Press the RIGHT PAGE button until "Initialize: All" is displayed. Press INC/YES twice. Press EDIT to return to Play mode.
All Other RD No ROM reset.
RHODES 660
(Same as M-660.) While holding EDIT, press WRITE. Use PARAMETER UP (^) and DOWN (v) to select ALL, then press WRITE. When completed, press EDIT to return to Play Mode.
RHODES 760
(Same as M-760.) While holding EDIT, press WRITE. Use PARAMETER UP (^) and DOWN (v) to select ALL, then press WRITE. When completed, press EDIT to return to Play Mode.
RHODES MK-60
(Same as MK-60.) No ROM reset.
RHODES MK-80
(Same as MK-80.) While holding WRITE, press EDIT. While holding the LEFT (<) and RIGHT (>) cursor buttons, press UP (^).
RSP-550
Power on while holding PROGRAM/PAGE UP (^) and DOWN (v), then press WRITE.
RSS-10
Power on while holding LOCK and OPTION. (The MCR-8 LED lights.) Press DEMO PROGRAM four times. Press DEVICE ID.
RSS-8048
No ROM reset.
RV-70
Power on while holding WRITE and DOWN. Use the UP (^) and DOWN (v) buttons to select AL. Press WRITE. Power off, then back on.
SB-55
Power on while holding CLEAR.
SBX-1000
No ROM reset.
S-Series No ROM reset.
SC-7
The unit resets each time you turn it on.
SC-33
Power on while holding REVERB and SPLIT, then press YES.
SC-50
Power on while holding both INSTRUMENT buttons, then press ALL.
SC-55
Power on while holding both INSTRUMENT buttons, then press ALL.
SC-55mkII
Power on while holding both INSTRUMENT buttons, then press ALL.
SC-88
While holding SELECT, press both INSTRUMENT buttons. Press ALL.
SC-155
Power on while holding both INSTRUMENT buttons, then press ALL.
SCC-700C
No ROM reset.
SD-35
Power on while holding CLEAR, then press REC.
SDD-320
No ROM reset.
SDE-330
Power on while holding SYSTEM and PROGRAM. Use the DATA dial to select SYSTEM + PROGRAM. Press MEMORY.
All Other SDE No ROM reset.
SDX-330
Power on while holding SYSTEM and PROGRAM. Use the DATA dial to select SYSTEM + PROGRAM. Press MEMORY.
SE-50
Power on while holding PARAM UP (^) and VALUE UP (^). Press WRITE. Wait three seconds and press WRITE again.
SE-70
Power on while holding in the NUMBER/VALUE knob. Press PARAMETER LEFT (<), then dial to STANDARD mode or GUITAR mode. Press WRITE.
SH-Series
No ROM reset.
SN-700
No ROM reset.
 
 
SP-700
No ROM reset.
SPD-8
Power on while holding EDIT, then press COPY. Use the VALUE UP (^) and DOWN (v) to select F A L in the window. Press ALL/ENTER.
SPD-11
Power on while holding ALL/ENTER and DOWN (the solid v). Press ALL/ENTER again.
SRC-2
No ROM reset.
SRV-330
Power on while holding SYSTEM and PROGRAM. Use the DATA dial to select SYSTEM + PROGRAM. Press MEMORY.
SRV-1000
No ROM reset.
SRV-2000
Factory: Power on while holding WRITE and REVERB NON-LINEAR. Delay Mode: Power on while holding WRITE, REVERB NON-LINEAR and ROOM SIMULATE.
SSC-8004
No ROM reset.
STUDIO M
(Same as MV-30.) No ROM reset.
SUPER JUPITER
(Same as MKS-80.) No ROM reset.
SUPER JX keybrd
(Same as JX-10.) No ROM reset.
SUPER JX module
(Same as MKS-70.) No ROM reset.
SUPER QUARTET
(Same as MKS-7.) No ROM reset.
All SYNTH PLUS (Same as HS-Series.)
No ROM reset.
SX-700
Press UTILITY. Use PARAMETER LEFT (<) and RIGHT (>) to select FACT INIT. Press WRITE.
TB-303
No ROM reset.
TD-5
Power on while holding EDIT and START/STOP, then press START/STOP again.
TD-7
Press SYSTEM. Use the LEFT (<) and RIGHT (>) CURSOR buttons to select INI, then press ENTER. Cursor to HI HAT and use the DATA dial to select ALL. Press ENTER twice.
TD-10
Press SETUP, then press F4 three times.
TL-Series
No ROM reset.
TP-20
No ROM reset.
TR-505
Power on while holding MODE and PATTERN GROUP KEY A .
TR-626
Power on while holding MODE and TRACK #1.
TR-707
Power on while holding TRACK WRITE and TRACK #1 .
TR-727
Power on while holding TRACK WRITE and TRACK #1 .
TR-808
No ROM reset.
TR-909
Power on while holding TRACK #1 and PATTERN #1 .
U-20
No ROM reset.
U-110
Power on while holding PART and EDIT.
U-220
No ROM reset.
VG-8
Power on while holding F1, F3, and F5. Press F6 for All, F4 for Patches, or F2 for System.
VK-7
Power on while holding MAIN, SUB and PEDAL in the HARMONIC BAR PART section.
VK-1000
Press WRITE, then press F3 to access the INIT MENU screen. Press F4 to access the COLD BOOT screen, then press ENTER.
VP-70
Power on while holding PLAY, VOICE EXPANSION, and MIDI.
VS-880
No ROM reset.
VT-1
Power on while holding down the PRESET/USER button.
W-30
No ROM reset.
W-50
Press CONTROL and MASTER simultaneously. Use PARAMETER UP (^) and DOWN (v) to select ALL. Press VALUE UP (^).
XP-10
Press UTILITY. Use VALUE + and - to select INITIALIZE, then press ENTER. Use VALUE + and - to select FACTORY PRESET, then press ENTER.
XP-50
Press DISK/UTILITY, select SOUND, select PRESET, then press ENTER. Use the dial to turn Memory Protect OFF if necessary, then press ENTER twice.
XP-80
Press UTILITY, press F6 (MENU) twice to select Factory, then ENTER. Press F6 (EXECUTE). Use the dial to turn Memory Protect OFF if necessary, press ENTER, then press F6 (EXECUTE).